SKU: MUS_FEN_YAM_TEN7_19_186

TENERE 700 19-Current Tail Tidy>186mm

XTZ 690

$129.00
In Stock
We aim to always have stock on hand, however sometimes we do get caught out. This item can still be purchased when on backorder. As we manufacture most of our products, back orders typically only take 7-14 days to fulfil, sometimes less.

Select Type:


Calculate Shipping



Get it Express - $6.00 (ETA: 1 days)
Get it Express at an additional charge of $6 per item using Australia post express parcel service."

Description

Brand new Mustard Bikes tail tidy for the 2019 onwards Yamaha XTZ690 - Tenere 700.

Our fender eliminator will refine your bikes styled and purposeful look. The tail tidy mounts your numberplate up close to the undertail removing the unsightly stock item.

This part has been CNC cut from lightweight 3mm aluminium for maximum strength combined with minimum weight and finished in a tough satin black powdercoat for a durable finish. Our product utilises the OEM steel fender support to provide an extremely solid design.  

The fender eliminator mounts right where the old fender was mounted. No modifications are needed to get it to fit because it's been designed to use the original mounting points of the OEM fender. The product has been designed to shield the indicator and number plate wiring as much as possible. All installation hardware is supplied, and a full step by step video guide is available to make your installation a breeze

A white LED number plate light is integrated into the design to light up your number plate and it's included in the price. So you don't have to modify your wiring this item has a link wire with the correct plug, making it plug and play.

 

Please see the Specifications tab above for more information on which selection best suits you.

 

Four options are available:

186mm option: Uses the OEM indicators and fits plates up to approximately 190mm wide.

254mm option: Uses the OEM indicators and fits plates up to approximately 258mm wide.

Aftermarket option: Uses10mm hole mounts to fit most after market indicators. Mounts spaced 160mm apart.

No mount option: Has the indicator mounts removed for use with integrated tail lights. 

No mount option usually has a 2-3 week lead time as they are manufactured to order.

 

All Mustard Bikes fender eliminators are designed and manufactured in Australia.

Install Guides

Installation guides and video's:

 

Not everyone is a technical wizard, so we have made a full "start-to-finish" install video to help you with your installation.

View the product installation video below:

Postage

Domestic Postage:

We use Australia post for all our postage options. They are reliable, trackable and will deliver to any address (unlike some other postal services).

Within Australia You can get free postage with Australia Post regular parcel post, or you can opt for express post for an extra $6 per item.

 

International Postage:

International Postage is available at a flat rate of $30 plus $10 for each additional item.

International purchases are sent with Australia Post International Air mail. This service provides tracking for most countries. In some cases tracking may not be available until the item reaches the destination country, or for some destinations may not be provided at all.

 

All items sent international are marked at the purchase price (excluding postage cost). It is an offence to incorrectly state the purchase price.

 

Customers are responsible for any import duties and taxes that may be applicable to importing this item into their country. Mustard Bikes cannot be held responsible for these costs and unclaimed items will only be refunded minus the postage costs once the item returns to us.

 

 

 

Specifications

Four options are available:

 

186mm option: Uses the OEM indicators and fits plates up to approximately 190mm wide.

This options suits plates from TAS, VIC, NSW, QLD, ACT, United states, Canada, USA, Canada, Kuwait, Sweden, Switzerland, Turkey and Mexico.

 

254mm option: Uses the OEM indicators and fits plates up to approximately 258mm wide.

This options suits plates from SA, WA, NT, New Zealand, UAE, Belgium, Holland, S Africa, Phillipines, Russia, Israel, France, Brazil, Norway, Malaysia, Spain, Singapore, Colombia, and Belarus.

 

Aftermarket option: Uses 10mm hole mounts to fit most after market indicators. Mounts spaced 160mm apart.

This option is for use with after market indicators. Customers should make sure that their indicators have sufficient length to clear the width of their number plate.

 

No mount option: Has the indicator mounts removed for use with integrated tail lights.

No mount option usually has a 2-3 week lead time as they are manufactured to order. This option is for use with integrated tail lights.

 

 

 

 

SKU MUS_FEN_YAM_TEN7_19
Brand Mustard Bikes
Shipping Weight 0.4900kg
Shipping Width 0.170m
Shipping Height 0.088m
Shipping Length 0.230m
Shipping Cubic 0.003440800m3

Reviews

Tenere 700 tail tidy

By: on 2 October 2024
Fits well, well made, good value.
(5)

Good quality but design issues

By: on 5 September 2024
This is on a Tenere 700 2019. All T7's would be the same. Vic plate is 185mm wide so ordered the 186mm version. I have Yamaha accessory led indicators - they are partially covered by the number plate. I guess stock indicators might be ok but who puts stock indicators on a tail tidy? The indicator position is fairly low, about midway on the number plate - would look far better if they were tucked up under the taillight. I'm about to put a a high aftermarket exhaust on mine and it will melt the indicators so either need to fabricate something or buy a different tail tidy. This obviously isn't an issue with the product but if you are going to add a high exhaust to your T7 might want to look elsewhere. Would be rectified if Mustard moved the indicators up which would look better anyway. Other than that (which is a bit of a deal breaker for my specific case) the product is well made and good quality.
(3)

www.mustardbikes.com Response
Hi Tim, Thanks for the feedback. We offer plenty of clear pictures of our product mounted, so that customers can get a clear indication of how the product looks on the bike. We also offer an aftermarket indicator mount version specifically for the purpose of mounting aftermarket indicators, which sounds like it may have been a better choice for your indicator choice. It's an unfortunate reality that you can't be everything to everyone, and as such compatibility with other aftermarket products cannot be guaranteed. This is not a design issue, and a good example of this is that a high mount indicator can present issues with ventura racks and luggage systems. Ultimately, the problem here is a compatibility issue with your specific choice of aftermarket products, rather than a design issue with our product.

Tenere 700 Tail Tidy

By: on 8 February 2024
Awesome product from Mustard Bikes, totally changed the look of my bike with a nice clean line at the rear and got rid of a heap of oem plastic. Love it.
(5)

Write a product review


We Also Recommend


$19.50

SKU: MUS_ACC_REFLEC

ADR reflector & mounting bracket

$15.00

SKU: MUS_ACC_LEDBOLT

Replacement LED Bolt / Plate light


You May Also Like


$55.00

SKU: MUS_ACC_IND_BUL

Bullet Mini LED indicators

$55.00

SKU: MUS_ACC_IND_PIX

Pixel Mini LED indicators


More From This Category


$129.00

SKU: MUS_FEN_YAM_MT07_13

MT-07 & FZ-07 2013 - 2020 Tail Tidy

See Options

$105.00

SKU: MUS_FEN_YAM_R6_08

YZF-R6 2008 - 2016 Tail Tidy

See Options

$145.00

SKU: MUS_FEN_YAM_MT09_17

MT-09 & FZ-09 17 - 2020 Tail Tidy

See Options

$129.00

SKU: MUS_FEN_YAM_MT09_13

MT-09 & FZ-09 2013 - 2016 Tail Tidy

See Options

$129.00

SKU: MUS_FEN_YAM_R1M_15

YZF-R1 (M) 15 - Current Tail Tidy

See Options

$115.00

SKU: MUS_FEN_YAM_R1_04

YZF-R1 2004 - 2006 Tail Tidy

See Options