Dragster 800 2014 - 2017 Tail tidy
Rated 4/5 based on 4 reviews.Description
Brand new Mustard Bikes tail tidy for the 2014 to 2017 MV Agusta Dragster 800.
Our fender eliminator will refine your bikes sleek and purposeful look. The tail tidy mounts your numberplate up close to the undertail removing the unsightly stock item.
This part has been CNC cut from lightweight 3mm aluminium for maximum strength combined with minimum weight and finished in a tough satin black powdercoat for a durable finish.
The fender eliminator mounts right where the old fender was mounted. No modifications are needed to get it to fit because it's been designed to use the original mounting points of the OEM fender. All required installation hardware is supplied in stainless steel and a video installation guide is provided for a hassle free installation.
A white LED number plate light is integrated into the design to light up your number plate and it's included in the price. So you don't have to modify your wiring this item has plugs pre-fitted, making it plug and play.
Due to the design of the stock indicators this product is only available with aftermarket indicator mounts.
All Mustard Bikes fender eliminators are designed and manufactured in Australia.
Install Guides
Installation guides and video's:
Not everyone is a technical wizard, so we have made a full "start-to-finish" install video to help you with your installation.
View the product installation video below:
Postage
Domestic Postage:
We use Australia post for all our postage options. They are reliable, trackable and will deliver to any address (unlike some other postal services).
Within Australia You can get free postage with Australia Post regular parcel post, or you can opt for express post for an extra $6 per item.
International Postage:
International Postage is available at a flat rate of $30 plus $10 for each additional item.
International purchases are sent with Australia Post International Air mail. This service provides tracking for most countries. In some cases tracking may not be available until the item reaches the destination country, or for some destinations may not be provided at all.
All items sent international are marked at the purchase price (excluding postage cost). It is an offence to incorrectly state the purchase price.
Customers are responsible for any import duties and taxes that may be applicable to importing this item into their country. Mustard Bikes cannot be held responsible for these costs and unclaimed items will only be refunded minus the postage costs once the item returns to us.
Specifications
Only one option is available:
Aftermarket option: Uses 10mm hole mounts to fit most after market indicators. Mounts spaced 160mm apart.
This option is for use with after market indicators. Customers should make sure that their indicators have sufficient length to clear the width of their number plate.
| SKU | MUS_FEN_MVA_D800_14 |
| Brand | Mustard Bikes |
| Shipping Weight | 0.3230kg |
| Shipping Width | 0.158m |
| Shipping Height | 0.090m |
| Shipping Length | 0.215m |
| Shipping Cubic | 0.003057000m3 |
Reviews
MV 800 dragster tail tidy
By: Jay on 13 May 2023This does take a while to fit..its actually the wiring that takes the longest to get it looking OEM. Fits great though. I used OEM Ducati LED indicators from a Hypermotard. I had to open the indicator holes up on the bracket. I didn't want to use a small number plate due to legal issues and the WA 254mm wide number plate is too wide to go in between indicators as there is only a 200mm gap..so I had to make a aluminium bracket that moves the number plate down about 50mm so it sits underneath the indicators. I painted it in black to match. I would have liked if this was manufactured so I didn't have to modify it. As it is..if you get caught with a modified number plate it's a large fine in every state and probably a defect notice and it would be a real hassle to take it back to stock for an inspection. If I could add a pic to show how it looks i would but you really should have made it so the standard number plate could be used.
(4)
www.mustardbikes.com Response
Hi there, Unfortunately, due to the huge variance in aftermarket indicator sizes we cannot guarantee the spacing of all indicators with all plates. In your circumstance this is not a case of the product not being made to suit your plate, but rather the combination of our product and standard Hypermotard indicators not being a suitable combination without modification.
Tail tidy, MV Agusta
By: Steffen Enger on 18 April 2023Perfect fit, nice product. A bit low budget screws.. Overall very good.
(4)
www.mustardbikes.com Response
Hi there, I am assuming you are referring to the replacement rear axle bolts. The bolts supplied are industrial grade high tensile bolts. Unfortunately they are not available to us in a finish other than the matt grey, which may have given the impression they are low budget. We can however assure you they are up to the job. The remainder of the supplied bolts are 304 grade stainless steel.
Dragster 800 2014 - 2017 Tail tidy
By: Zibby on 27 December 2020The product is very well engineered, fits perfectly and looks amazing !! The installation video provided is also very easy to follow. Highly recommend.
(5)
MV Agusta Dragster 800 Tail Fender Eliminator
By: Bill Cameron on 16 September 2019I brought this product for my partners MV Agusta Dragster and fitted it for her as finding replacement indicators etc was a pain and the factory unit was quite ugly. I followed the excellent video on YouTube which was super helpful and made the job painless and installing the new tail tidy was straight forward. The quality of the product is high and works perfectly. I strongly recommend this product to anyone looking at replacing their stock factory unit. BIll
(5)
We Also Recommend
You May Also Like
