YZF-R3 2019 Onwards Tail Tidy > 186mm
Also Fits MT-03 2020 Onwards.
Brand New Mustard Bikes Tail Tidy for the 2019 onwards Yamaha YZF-R3 & 2020 onwards MT-03.
FITS 2025 R3!
Please see the Specifications tab above for more information on which selection best suits you.
Four options are available:
186mm option: Uses the OEM indicators and fits plates up to approximately 190mm wide.
254mm option: Uses the OEM indicators and fits plates up to approximately 258mm wide.
Aftermarket option: Uses10mm hole mounts to fit most after market indicators. Mounts spaced 160mm apart.
All Mustard Bikes fender eliminators are designed and manufactured in Australia.
Installation guides and video's:
Not everyone is a technical wizard, so we have made a full "start-to-finish" install video to help you with your installation.
View the product installation video below:
We use AustPost for all our domestic and international shipping. They are reliable, trackable and are the most cost-effective option available.
| Parcel Post: FREE | Additional Items: FREE | Est. Delivery: 5–7 days |
| Express Post: $6.00 | Additional Items: $6.00 | Est. Delivery: 2–3 days |
| Parcel Post: $17.00 | Additional Items: $5.00 | Est. Delivery: 7–10 days |
| Express Post: $29.00 | Additional Items: $10.00 | Est. Delivery: 5–7 days |
| International Standard: $30.00 | Additional Items: $10.00 | Est. Delivery: 10–14 days |
| US International Standard: $50.00 | Additional Items: $30.00 | Est. Delivery: 10–14 days |
Available Configurations
186mm Version
Designed for OEM indicators and number plates up to approximately 200mm wide. Commonly suited to motorcycle number plates from TAS, VIC, NSW, QLD, ACT, most United States and Canadian plates, as well as Kuwait, Sweden, Switzerland, Turkey, and Mexico.
254mm Version
Designed for OEM indicators and number plates up to approximately 258mm wide. Commonly suited to motorcycle number plates from SA, WA, NT, New Zealand, UAE, Belgium, Netherlands, South Africa, Philippines, Russia, Israel, France, Brazil, Norway, Malaysia, Spain, Singapore, Colombia, and Belarus.
Aftermarket Version
Designed for use with most aftermarket indicators featuring 10mm mounting holes with 160mm spacing. Customers should ensure their indicators provide sufficient clearance for the width of their selected number plate.
No Mount Version
Designed for use with integrated tail lights where external indicators are not required. This version removes the indicator mounting points for a cleaner appearance and is typically manufactured to order, with a usual lead time of 2–3 weeks.
| SKU | MUS_FEN_YAM_R3_19 |
| Shipping Weight | 0.4950 kg |
| Width | 0.170 m |
| Height | 0.088 m |
| Length | 0.230 m |
Good but with worthy notes
Does what it says but some notes for the manufactures\sales that would be useful to modify/let people know. For the MT03 2021 (can't speak for the r3 but I assume its the same), the hole in the frame the wires pass through is not the same hole as the wiring passes through from the factory, and the new hole needs widening slightly to fit the plugs or you need to cut and rewire the factory plugs through the hole. This isn't something that is in the control of mustard bikes but is something people buying need to know about in case they don't have the tools to do it. The nylon spacers provided also have the inner holes drilled a little too narrow by a few mm, so they don't fit and you need to drill them out, you can install the unit without them but its a bit sketchy. The spacer width for the indicator mounts needs revising as well. Stock indicators 'fit' without the spacers with little play, but with the spacers they are a royal pain in the ass to get on, and definitely do not need to be that tight for the purpose they serve. Besides all that, if you can do the modifications required, it looks great, is sturdy, powder coat seems good quality, and is overall good. Just would expect a little higher quality in the design given you're paying $130 for essentially a few small pieces of steel cut and bent with an LED bolted on, so I was assuming most of that cost went to R&D. Overall still worth it I think, you'll likely run into most of these issues with most of these products online and its still decent value.
www.mustardbikes.com: Thanks for the feedback Will. We'll pass these on for review. Regarding the indicator spacers, this is a common challenge on all Yamaha models. This product would probably benefit from a video install guide (it was designed prior to us implementing the video install guides) to help with some of the issues you mentioned, including the indicator install. Doing a video guide may be something we will do in the future, as we have gone back to film some of our older products since implementing the install guides.
Great product, great price, easy to install
Great company. This is my 2nd tail tidy I've purchased from Mustard Bikes. Now my R7 & R3 look amazing. The wife is extremely happy too. Speedy delivery too.
Great products every time
As stated - have purchased many MB products for a great variety of motorcycles, and always find the product and service to be perfect. Finish, build and instructions are always great, and makes the units easy to fit, with minimal fuss and no issues. High recommended.
Tail Tidy looks awesome!
Mark was a great help in helping pick the right type of Tail Tidy for my 2021 YZF-R3 and Yamaha LED Plus lights. The guys at Rocky Yamaha were able to install the kit no worries to replace the hideous OEM tail. The bike now looks super clean and the quality of the Mustard Tail Tidy is spot on.
