Yamaha Tenere 700 & XTZ690 2019+ Tail Tidy -186mm
XTZ 690
Mustard Bikes Yamaha Tenere 700 / XTZ690 Tail Tidy 2019 Onwards
Designed for the 2019 onwards Yamaha Tenere 700 (XTZ690), this Mustard Bikes tail tidy replaces the bulky factory rear fender with a cleaner, more streamlined appearance. By relocating the number plate neatly beneath the rear of the motorcycle, it creates a sharper look while retaining the strength and support of the original factory design.
Manufactured from CNC-machined 3mm aluminium, the tail tidy combines strength and durability with minimal weight. Finished in a tough satin black powder coat, it delivers a clean, high-quality appearance designed to complement the Tenere 700's adventure styling.
Unlike designs that remove the original fender support, this tail tidy utilises the OEM steel fender support to maintain a strong and secure mounting arrangement. It uses the original factory mounting points, so no modifications to your motorcycle are required. The design also helps shield the indicator and number plate wiring from exposure. All required installation hardware is supplied, along with a step-by-step video installation guide to make fitting straightforward.
An integrated white LED number plate light is included in the price and comes with an OEM-style link wire featuring the correct factory connector. This provides plug-and-play installation without the need to cut or modify your motorcycle's original wiring.
Key Features
- Designed Specifically for the Yamaha Tenere 700.
- Precision CNC Machined from Aluminium.
- Satin Black textured Powder-Coat Finish.
- White LED Number Plate Light pre-installed.
- Plug & Play Wiring with OEM-Style Connector.
- Stainless Steel Mounting Hardware.
- Video Installation Guide Included.
- Designed and manufactured in Australia.
Vehicle Fitment
This tail tidy is compatible with the following Yamaha models:
- 2019 - 2026 Yamaha Tenere 700
- 2019 - 2026 Yamah XTZ690
Available Options
Choose from multiple configurations designed to suit a wide range of number plate and indicator setups.
For detailed version information, number plate compatibility, and setup guidance, please see the Specifications tab above.
All Mustard Bikes fender eliminators are designed and manufactured in Australia.
Installation guides and video's:
Not everyone is a technical wizard, so we have made a full "start-to-finish" install video to help you with your installation.
View the product installation video below:
We use AustPost for all our domestic and international shipping. They are reliable, trackable and are the most cost-effective option available.
| Parcel Post: FREE | Additional Items: FREE | Est. Delivery: 5–7 days |
| Express Post: $6.00 | Additional Items: $6.00 | Est. Delivery: 2–3 days |
| Parcel Post: $17.00 | Additional Items: $5.00 | Est. Delivery: 7–10 days |
| Express Post: $29.00 | Additional Items: $10.00 | Est. Delivery: 5–7 days |
| International Standard: $30.00 | Additional Items: $10.00 | Est. Delivery: 10–14 days |
| US International Standard: $50.00 | Additional Items: $30.00 | Est. Delivery: 10–14 days |
International purchases are provided with tracking for most countries. In some cases, tracking may not be available until the item reaches the destination country, or for some destinations may not be provided at all.
All items sent internationally are marked at the purchase price (excluding postage cost). It is an offence to incorrectly state the purchase price.
Available Configurations
254mm Version
Designed for OEM indicators and number plates up to approximately 258mm wide. Commonly suited to motorcycle number plates from SA, WA, NT, New Zealand, UAE, Belgium, Netherlands, South Africa, Philippines, Russia, Israel, France, Brazil, Norway, Malaysia, Spain, Singapore, Colombia, and Belarus.
Aftermarket Version
Designed for use with most aftermarket indicators featuring 10mm mounting holes with 160mm spacing. Customers should ensure their indicators provide sufficient clearance for the width of their selected number plate.
No Mount Version
Designed for use with integrated tail lights where external indicators are not required. This version removes the indicator mounting points for a cleaner appearance and is typically manufactured to order, with a usual lead time of 2–3 weeks.
186mm Version
Designed for OEM indicators and number plates up to approximately 200mm wide. Commonly suited to motorcycle number plates from TAS, VIC, NSW, QLD, ACT, most United States and Canadian plates, as well as Kuwait, Sweden, Switzerland, Turkey, and Mexico.
| SKU | MUS_FEN_YAM_TEN7_19 |
| Shipping Weight | 0.4900 kg |
| Width | 0.170 m |
| Height | 0.088 m |
| Length | 0.230 m |
| Type | Fender Eliminator |
Tenere 700 tail tidy
Fits well, well made, good value.
Good quality but design issues
This is on a Tenere 700 2019. All T7's would be the same. Vic plate is 185mm wide so ordered the 186mm version. I have Yamaha accessory led indicators - they are partially covered by the number plate. I guess stock indicators might be ok but who puts stock indicators on a tail tidy? The indicator position is fairly low, about midway on the number plate - would look far better if they were tucked up under the taillight. I'm about to put a a high aftermarket exhaust on mine and it will melt the indicators so either need to fabricate something or buy a different tail tidy. This obviously isn't an issue with the product but if you are going to add a high exhaust to your T7 might want to look elsewhere. Would be rectified if Mustard moved the indicators up which would look better anyway. Other than that (which is a bit of a deal breaker for my specific case) the product is well made and good quality.
www.mustardbikes.com: Hi Tim, Thanks for the feedback. We offer plenty of clear pictures of our product mounted, so that customers can get a clear indication of how the product looks on the bike. We also offer an aftermarket indicator mount version specifically for the purpose of mounting aftermarket indicators, which sounds like it may have been a better choice for your indicator choice. It's an unfortunate reality that you can't be everything to everyone, and as such compatibility with other aftermarket products cannot be guaranteed. This is not a design issue, and a good example of this is that a high mount indicator can present issues with ventura racks and luggage systems. Ultimately, the problem here is a compatibility issue with your specific choice of aftermarket products, rather than a design issue with our product.
Tenere 700 Tail Tidy
Awesome product from Mustard Bikes, totally changed the look of my bike with a nice clean line at the rear and got rid of a heap of oem plastic. Love it.
We Also Recommend
You May Also Like
